Sternotomy:

  • Skin incision is commonly made in the midline from jugular notch to xyphoid.

NOTE: more advanced surgeons may choose to reduce the size of the incision, particularly at the top.

  • Cell-saver suction is utilized to retrieve any blood loss during the procedure.
  • Generally, begin at the sternal notch staying on the bone with the bovie cauterization and then using blunt dissection with a finger to palpate behind the upper manubrium to confirm that the space is clear. Similar blunt dissection at the xyphoid.

Sternotomy:

  • A sternal saw is used to open the entire length of the sternum from sternal notch to xyphoid process, staying in the midline of the sternum.

Sternotomy:

  • Bleeding from the sternal marrow and periosteum is commonly controlled to avoid ongoing oozing throughout the procedure. A topical absorbable hemostat such as SURGICEL™ FIBRILLAR Absorbable Hemostat can be applied to the sternal edges and bolstered with a sterile drape and the retractors.

Conduit Dissection:

  • Selecting the most durable bypass conduit is key to a successful CABG. The best conduit depends on the clinical circumstances of the patient. There are 3 conduit choices: 1 - Internal mammary (thoracic) artery (IMA); 2 - Saphenous vein graft (SVG); 3 - Radial Artery (RA).

Dissection of the Left Internal Mammary Artery (LIMA):

  • The mammary artery is exposed with a retractor.

Dissection of the Left Internal Mammary Artery (LIMA):

  • The left pleura is usually opened widely to further expose the artery which runs directly under the anterior chest wall.

Dissection of the Left Internal Mammary Artery (LIMA):

  • LIMA is harvested using an energy device.

Dissection of the Left Internal Mammary Artery (LIMA):

  • The LIMA is typically left attached to the subclavian artery proximally and divided distally.
  • Standard practice is to soak the LIMA in papaverine solution to promote vasodilation.

Dissection of Additional Conduits:

  • The radial artery or greater saphenous vein can be harvested using an electrocautery device or an advanced energy device.
  • RIMA may be harvested if indicated.

Cannulation:

  • The pericardium is opened from the diaphragm to its reflection at the upper ascending aorta, and the heart is exposed.

NOTE: The upper pericardium is frequently covered in fatty tissue and remnants of the thymus gland.  This can be a source of ongoing bleeding.

  • Usually, 2-0 silk pericardial sutures are placed to retract the pericardium and expose the heart and great vessels.
  • Arterial Cannula is placed.
  • Venous Cannula is placed
  • Retrograde Cardioplegia Cannula may be placed as needed. NOTE: Retrograde Cardioplegia cannula is usually placed in more complex procedures.

Arresting the Heart:

  • An aortic cross clamp is applied across the aorta between the aortic cannula and the aortic root needle cutting off the flow of blood from the aortic cannula to the heart.

Technical Considerations for Distal Anastomosis

There are two general approaches to the sequence of anastomoses:

  • Single clamp technique: All proximal and distal anastomoses are completed while the heart is arrested.
  • Two clamp technique: All distal anastomoses are completed while the heart is arrested and then the cross clamp is removed, and a partial occlusion clamp is placed on the ascending aorta to complete the proximal anastomoses.

Identification of Blocked Vessels

  • Once the heart is arrested and empty of blood, the surgeon identifies the arteries to be bypassed, and determines the best revascularization technique to be deployed with the conduit available.
  • The cardiac catheterization is the road map for the surgeon, and it is frequently available in the room during the procedure.

Distal Anastomosis

  • The target vessel is generally located beyond the critical stenosis.
  • The target vessel is exposed.

NOTE: The goal is to identify a place on the target vessel that is beyond significant disease but at a point where the vessel is of reasonable caliber for anastomosis.

  • An arteriotomy is made in the vessel of a length that is approximately corresponds to the beveled end of the conduit.
  • The conduit is beveled at 30 degrees and notched at the heel.

Suturing the Anastomosis:

  • A general practice is starting at 3 o’clock on the right side of the conduit vessel, the suture is passed outside-in and then inside-out at the 3 o’clock location on the arterial target vessel.

Suturing the Anastomosis:

  • Approximately three stitches are performed in the same manner at 2, 1, and 12 o’clock and then two more on the left side of that heel at 11 and 10 o’clock, followed by a parachuting technique in which the conduit is then brought down to the target vessel.

NOTE: Alternatively, a U-stitch can be placed at the heel of the anastomosis without significant parachuting and both side of the suture are run.

  • The anastomosis can then be completed by placing another six stitches, evenly spaced, utilizing the same technique, around the toe and back at the 3 o’clock position, where a final knot is placed on the side to secure the anastomosis.

NOTE: Often, the conduit is distended with solution gently injected by the assistant while tying the sutures to avoid any constriction of the anastomosis.  This also allows the surgeon to check for any leaks.

The LIMA anastomosis:

  • This is usually the last distal anastomosis and is almost always placed to the Left Anterior Descending (LAD) Artery.
  • Prior to starting the anastomosis, its confirmed that there is no twisting of the mammary artery.
  • An arteriotomy in the LAD is made usually at the junction of the middle and distal thirds of the vessel however the patient anatomy and extent of disease will dictate where this is.
  • Once this anastomosis is complete the surgeon may briefly remove the bulldog clamp on the mammary artery to check for any bleeding.
  • The sides of the mammary artery are frequently sutured to the epicardium with 6-0 polypropylene sutures, such as Prolene™ Polypropylene Suture.

Proximal Anastomosis (single clamp technique):

  • Generally, the vein graft is injected with vein solution and the length to the aorta is measured.

Proximal Anastomosis (single clamp technique):

  • The vein is cut at the appropriate length.
  • Arteriotomy on the aorta is created usually with a #11 blade.

Proximal Anastomosis (single clamp technique):

  • A circular hole is created using an aortic punch. The size of the aortic punch used depends on the size of the chosen conduit graft.

Proximal Anastomosis (single clamp technique):

Proximal Anastomosis (single clamp technique):

  • With the long axis of the graft aligned at an appropriate angle to the ascending aorta, anastomosis is completed generally with approximately 8- 10 stitches, ensuring that symmetry in the spacing between stitches is achieved for hemostasis.

 

Proximal Anastomosis (single clamp technique):

  • When the bypass grafts are complete the cross clamp is removed, the patient is placed in Trendelenburg Position.
  • The cross clamp can be removed and CPB flow restored to normal.

Preparing to disconnect from CPB

  • Once the cross clamp is removed blood flow to the coronary arteries is restored and spontaneous heart rhythm usually returns. 
  • Temporary pacing wires and chest tubes are placed.
  • If the heart does not spontaneously start the temporary pacing wires may be used.

NOTE: It is important to visualize both lungs expanding while anesthesiologist begins ventilating the patient

Discontinuing cardiopulmonary bypass and cannulation

  • Once there is an adequate rhythm with reasonable contraction of both ventricles and the both lungs are being ventilated, the patient is ready to be weaned from the heart-lung machine.
  • When CPB has been discontinued, the venous cannula, retrograde cannula and aortic root needle is removed.
  • During this time any blood volume remaining in the heart-lung machine is returned to the patient.
  • The aortic cannula is removed.
  • Confirm that there are no areas of active bleeding. Consider placing topical absorbable hemostat such as SURGICEL™ FIBRILLAR Absorbable Hemostat - on the sternal edges prior to closing the sternum to minimize oozing from the lower sternal table and to utilize its bactericidal affects.
  • Proximal anastomoses and cannulation sites are inspected for bleeding / oozing.
  • Integrity of the bypass grafts is checked for twists or kinks.
  • The overall heart function is assessed.
  • The sternotomy retractor is removed.
  • A laparotomy pad is placed in the incision and chest wall is inspected for bleeding.
  • Tighten Steel Wires.