Proven Clinical Outcomes
>500K
surgical procedures
47 years
of servicing the veterinary community
0.006%
complaint rate2
Features & Benefits

Use of two Dynamic Compression Unit (DCU) Holes in shaft of plate
DePuy Synthes TPLO Plates have two DCU holes in the shaft of the plate to allow for compression of bone segments which creates an environment conducive to bone healing.3

Anatomically Designed
Shape and screw trajectories established through advanced imaging and extensive cadaver studies.
- Minimizes the need to contour the proximal section of the plate1†
- Mitigates the risk of intra-articular screw placement1

Precise locking interface between DePuy Synthes plate and screws
Use of DePuy Synthes locking screws in the head of the DePuy Synthes TPLO Plate allows for better maintenance of tibial plateau position during plate application and throughout the bone healing process compared to use of conventional screws.1,4

Implants offered in multiple sizes
A full range of patented plate designs that suit the full breadth of the patient population. Includes:
- 2.0mm
- 2.4mm
- 2.7mm
- 3.5mm Small
- 3.5mm
- 3.5mm Broad

Biologically favorable TPLO Saw Blades
The DePuy Synthes TPLO Saw Blade System has a fine-tooth profile that outperforms traditional biradial blade designs with5‡:
- Up to 64% less heat generation
- 45% less time above necrotic temperature limit
- Up to 63% higher cutting rate

Patented TPLO Jig and Saw Guide System
The DePuy Synthes TPLO Jig is designed to maintain stability and limb alignment while performing the TPLO procedure.6 The range of TPLO Saw Guides allow multiple positions for versatile positioning to accommodate a broad spectrum of patient anatomies.


UNIUM™ System
Designed with a focus on ergonomics, reliability and efficiency, so the focus remains on the patient, without distraction. One power tool system for use in trauma and spine surgery.
Supporting Documentation
FAQ
Is there a risk to mixing implants from different manufacturers?
The precision design of DePuy Synthes products is very important for long-term product function and optimal fit between implants. The mixing of DePuy Synthes implants with implants from other companies is not recommended. The overall performance may be compromised due to differences in design, chemical composition, mechanical properties, and quality.
What does it mean to be AO Approved?
DePuy Synthes and the AO, through the AOTC, have collaborated on new product development for more than 60 years. There is a rigorous process in place including product initiation and voice of customer, assessment, usability testing, and certification of the product.
Do DePuy Synthes plates come with K-wire holes?
Yes, K-wire holes were introduced on DePuy Synthes TPLO plates in 2021. They may be used to temporarily fixate the plate to the bone. There are two distal K-wire holes for flexibility in placement and they are angled to avoid interference with drill guides.
What size TPLO implants are available?
DePuy Synthes TPLO plates are available as follows: 2.0mm; 2.4mm; 2.7mm; and 3.5mm (small, standard, and broad) to accommodate small, medium, and large breed dogs.
What instruments are required for use with the System?
To use the DePuy Synthes TPLO System, the veterinary surgeon will need:
- Small or Mini Fragment set
- TPLO Jig & Saw Guides
- Small Battery Drive Set
Can you achieve compression with the TPLO plate?
DePuy Synthes TPLO Plates have two Dynamic Compression Unit (DCU) holes in the shaft of the plate to allow for compression of bone segments, which creates an environment conducive to bone healing.3
How many surgeries have been performed with the DePuy Synthes TPLO System?
More than 500,000 TPLO surgeries have been performed with the DePuy Synthes TPLO System.
When was the DePuy Synthes TPLO System developed?
The DePuy Synthes TPLO system was developed in 2006.
© Johnson & Johnson Medical Limited 2023. All Rights Reserved.
This site is published by the DePuy Synthes Companies, which are solely responsible for its content.
This site is for visitors from United Kingdom.
The third party trademarks used herein are trademarks of their respective owners.
Please refer always to the Instructions for Use / Package Insert that come with the device for the most current and complete instructions.