Plates & Screws

LCP™ Proximal Tibia Plate (3.5 and 4.5 mm)

Product Codes:

02.120.701, 02.120.701S, 02.120.702...

Plates & Screws

LCP™ Proximal Tibia Plate (3.5 and 4.5 mm)

Product Codes:

02.120.701, 02.120.701S, 02.120.702...

LCP™ Proximal Tibia Plates merge conventional plating techniques with locking screw technology to enable surgeons to create a fixed-angle construct while using familiar plating techniques. They are available in 3.5- and 4.5-mm sizes to accommodate a variety of fractures.

LCP™ Proximal Tibia Plates merge conventional plating techniques with locking screw technology to enable surgeons to create a fixed-angle construct while using familiar plating techniques. They are available in 3.5- and 4.5-mm sizes to accommodate a variety of fractures.

Features & Benefits

Two Bend Options Available

The 3.5 mm LCP Proximal Tibia plate is available in both standard and low bend designs to accommodate more patient anatomies. The low bend features a proximal bend placed lower than on the standard bend.

Plate Head Design

The plate head consists of three convergent threaded screw holes to accept 5.0 mm locking or conical screws as well as two 2.0 mm holes for preliminary fixation with K-wires.

Combi Holes in Plate Shaft

The Combi holes in the plate shaft are distal to the three angled locking holes and combine a DCU hole with a threaded locking hole. They accept 3.5 mm locking screws with a StarDrive Recess in the threaded portion of the hole, and 3.5 mm cortex or shaft screws in the DCU portion of the hole.