PLATES & SCREWS

Variable Angle LCP™ Two-Column Volar Distal Radius Plate

PLATES & SCREWS

Variable Angle LCP™ Two-Column Volar Distal Radius Plate

The 2.4 mm Variable Angle LCP™ Two-Column Volar Distal Radius Plate is part of the 2.4 mm Variable Angle LCP Distal Radius System. The plates are anatomically contoured to match the anatomy of the distal radius and are designed to address both simple and complex fractures.

The 2.4 mm Variable Angle LCP™ Two-Column Volar Distal Radius Plate is part of the 2.4 mm Variable Angle LCP Distal Radius System. The plates are anatomically contoured to match the anatomy of the distal radius and are designed to address both simple and complex fractures.

Features & Benefits

Variable Angle Locking

Four columns of threads in the variable angle locking holes provide four points of threaded locking between the plate and the variable angle locking screw, forming a fixed-angle construct at the desired screw angle.

Anatomic Contour

Our plates are contoured to specifically fit the anatomic profile of the distal radius, allowing them to address both simple and complex fractures.

Combi Holes

The plate features LCP Combi Holes in the shaft which allow fixed-angle locking screw fixation with angular stability in the threaded section, or compression with  cortex screws in the nonthreaded section.

Product Resources

Your download will begin automatically. If an error occurs, click here to download.