CRANIOMAXILLOFACIAL

Maxillofacial Trauma & Reconstruction

CRANIOMAXILLOFACIAL

Maxillofacial Trauma & Reconstruction

Facial Trauma and Reconstruction procedures encompass simple facial fractures to complex panfacial fractures. This procedure category includes products to address fractures of the mandible, maxilla, and the midface including orbital fractures and fractures of the zygoma. In addition, this category includes reconstructive procedures, and products used for reconstruction, such as plates for mandible reconstruction following a mandibular tumor resection.

Browse Products by Anatomy

View More View Less

Filter By

Reset

Product Group

Trending Products

Skull showing mandibular angle and symphysis fractures treated with MatrixMANDIBLE plates and screws

MatrixMANDIBLE™ System

MatrixMANDIBLE™ Plating System is a streamlined, comprehensive system that offers flexibility, ease of use and high quality implants and instruments.

Skull showing midface trauma treated with MatrixMIDFACE plates and screws

MatrixMIDFACE™ System

The MatrixMIDFACE™ Plating System is designed as a simple and efficient system consisting of plates, screws, and instrumentation.  

Skull showing a maxillomandibular fixation using the MatrixWAVE system

MatrixWAVE™ MMF System

The MatrixWAVE™ MMF System is a bone-borne maxillomandibular fixation system that consists of a wave-shaped plate that is attached to the mandible and maxilla with self-drilling locking screws.

Skull showing personalized Titanium 3D Printed and PEEK Milled Implants, and Matrix plates and screws

TRUMATCH™ CMF Personalized Solutions

Advanced personalized solutions  for complex trauma and reconstructions through integrating of virtual surgical planning, intraoperative surgical tools and implants.*

Skull showing an orbital floor reconstructed with a MatrixMIDFACE preformed orbital plate.

MatrixORBITAL™ Plates

The MatrixMIDFACE™ Preformed Orbital Plates are designed from CT scan data1. These plates consist of implants that closely approximate the topographical anatomy of the human orbital floor and medial wall and are intended for use in a selective craniomaxillofacial trauma.

Skull showing a mandibular body and symphysis reconstructed with a MatrixMANDIBLE preformed reconstruction plate

MatrixMANDIBLE™ Preformed Reconstruction Plates

MatrixMANDIBLE™ Preformed Reconstruction Plates are preshaped to the anatomy of the mandible. Their shape was obtained by statistical analysis of data derived from more than 2,000 CT scans originating from various adult populations.2

Skull showing a cranial vault reconstructed with Rapidsorb resorbable plates and screws

RAPIDSORB™ Resorbable Fixation System

RAPIDSORB™ Resorbable Fixation System consists of resorbable plates, meshes and screws intended for use in fracture repair and reconstructive procedures of the craniofacial skeleton. The implants are resorbed by the body in approximately 12 months.3

Close up of gloved fingers holding a Vivigen Cellular Bone Matrix globe shaped putty

ViviGen® Cellular Bone Matrix

ViviGen® Cellular Bone Matrix is a cellular allograft intended for repair or reconstruction of musculoskeletal defects. It is an osteogenic, osteoconductive, and osteoinductive allograft bone void  filler.4

On Demand Learning

TRUMATCH™ Orbital Solutions Overview

Access More On-Demand Learning at the J&J Institute

References

  1. Metzger MC, Schon R, Tetzlaf R, et al. Topographical CT-data analysis of the human orbital floor. Int J Oral Maxillofac Surg. 2007;36(1):45-53.
  2. Metzger MC, Vogel M, Hohlweg-Majert B, et al. Anatomical shape analysis of the mandible in Caucasian and Chinese for the production of preformed mandible reconstruction plates. Journal of Cranio-Maxillofacial Surgery. 2011;39(6):393-400
  3. Landes CA, Ballon A, Roth C. Maxillary and mandibular osteosyntheses with PLGA and P (L/DL) LA implants: a 5-year inpatient biocompatibility and degradation experience. Plastic and reconstructive surgery. 2006;117(7):2347-2360.
  4. Data on file LifeNet Health 65-0347.

* Virtual surgical planning, Titanium 3D printed guides, plates and implants, polyamide guides, orthognathic splints and anatomical models are manufactured by Materialise ViviGen is a registered trademark of LifeNet Health.

200771-220110 DSUS

Please refer to the instructions for use for a complete list of indications, contraindications, warnings and precautions.