- Implants - ATTUNE™ Knee System Femoral and ATTUNE™ Knee System Tibial Components
- Pins - Headed Pins and Non-Headed Pins
The ATTUNE™ Knee System has 3.15 mm diameter pins to increase the stability and functionality of the instruments. The INTUITION Instruments are designed to be used with the ATTUNE™ Knee System pin pack that contains Universal Pins and Threaded Headed Pins. Threaded Non-Headed Pins are also shown below. - Step Drill - A drill attachment to prepare the bone for the IM rod.
- Bone Saw – Used for the femoral and tibial resection of bone.
- Osteotome – A standard instrument used for the removal of osteophytes and sharp pieces of bone typically after a resection.
- Intuition Instruments
- Spacers - ATTUNE™ Knee System Spacer Base
- Impactor and Mallet - ATTUNE™ Knee System Impactor – General instruments used to fully seat trials and the final implants.
- Curette – General instrument used to remove excess cement.
- Rongeur – General instrument used to remove bone and osteophytes.
Total Knee Arthroplasty using the ATTUNE™ Knee System
Total Knee Arthroplasty using the ATTUNE™ Knee System
Commonly Used Devices
Commonly Used Devices

ATTUNE™ Knee System Femoral and ATTUNE™ Knee System Tibial Components
Pins - Headed Pins and Non-Headed Pins
The ATTUNE™ Knee System has 3.15 mm diameter pins to increase the stability and functionality of the instruments. The INTUITION Instruments are designed to be used with the ATTUNE™ Knee System pin pack that contains Universal Pins and Threaded Headed Pins. Threaded Non-Headed Pins are also shown below.
ATTUNE™ Knee System 3.15 Diameter Universal Pin
The Universal Pin can be drilled in or hammered in, and drilled out or pulled out using the Pin Jack.
ATTUNE™ Knee System Threaded Headed Pin
The Threaded Headed Pin is designed to be inserted and removed with a Power Drill. These pins are best used to secure blocks against a flat surface such as cut bone.
ATTUNE™ Knee System Threaded Non-Headed Pin
The Threaded Non-Headed Pin is also available and is designed to be inserted and removed with a Power Drill.
ATTUNE™ Knee System Pin Jack
ATTUNE™ Knee System Power Driver

ATTUNE™ Knee System Step Drill Drilling into Knee

ATTUNE™ Knee System Bone Saw Cutting Into Knee
Curved Osteotome Seen Inserted Between Bones

Intuition Instruments
Distal Femoral Jig and Tibial Jig, and Measured Sizer Instrument.
ATTUNE™ Knee System Spacer Base
ATTUNE™ Knee System Spacer Base and desired Shim are attached to the Spacer Block to assess both extension and flexion gaps.
Impactor and Mallet - ATTUNE™ Knee System Impactor
General instruments used to fully seat trials and the final implants.