RAPIDSORB™ Resorbable Fixation System
RAPIDSORB™ Resorbable Fixation System
RAPIDSORB™ is a resorbable fixation system, which is intended for fracture repair and craniofacial reconstruction.1-3
System consists of implants: plates, meshes, foils, and screws, dedicated instruments and cases.
Due to resorbable material the implants are radiolucent4 and might be an attractive alternative to metal implants.
MEDIA
RAPIDSORB™ is a resorbable fixation system, which is intended for fracture repair and craniofacial reconstruction.1-3
System consists of implants: plates, meshes, foils, and screws, dedicated instruments and cases.
Due to resorbable material the implants are radiolucent4 and might be an attractive alternative to metal implants.
Key Resources
Surgical Technique Guide
Instructions for Use
Material Science
Polymer
RAPIDSORB Resorbable Fixation System implants are made from 85:15 poly(L-lactide-co-glycolide).3, 5-7
Implant Stability
RAPIDSORB implants retain their stability for at least 8 weeks during the critical bone healing phase.8,9 The device will then be absorbed and excreted by the body within approximately 12 months.9,10
In Vivo Degradation
In vivo degradation occurs by hydrolysis to lactic and glycolic acid, which is then metabolized into carbon dioxide and water. Both end products will be absorbed and excreted by the body.11,12
Features & Benefits
Many Plate Options
Multiple plates shapes are offered in 0.5, 0.8 and 1.2 mm thicknesses.
Plates design includes features like beveled edge and straight edge design of cross-slots between the holes.
Pre-shaped plates can be contoured.
Meshes & Foils
Round-shaped contourable meshes might be applied without cutting or kinking.
When needed, meshes & foils can be cut into desired plate geometries.
Solid foils allow customization of hole size and location.
Screws
Screws are available in 3 diameters: 1.5, 2.0 & 2.5 mm.
2.0 mm screws can be used with 1.5 mm plates as primary or emergency screws.
2.5 mm screws can be used as emergency screws for 2.0 mm screws in case of breakage.
Compact Water Bath
Compact Water Bath is available with custom sterile drape for thermal contouring of plates, meshes and foils.
Supporting Documentation
© DePuy Synthes 2023. All rights reserved.
This site is published by the DePuy Synthes Companies, which are solely responsible for its content. This site is for visitors from Europe, Middle East and Africa.
The third party trademarks used herein are trademarks of their respective owners.
Product(s) may not be commercially available in all markets. This content may not be used externally in those markets where regulatory approval has not been granted for all the products referenced.
Please refer to the instructions for use for a complete list of indications, contraindications, warnings, and precautions.